What kind of oil should I put in the engine? Mazda motor oil Online selection of lubricants
Engine oil table from the website
Many car owners are wondering what kind of oil to pour into the Mazda 3 engine? We have put together a summary table, looking at which everything becomes clear where, what and how much to pour. In short, in the Mazda 3 2003 - 2017. with a 1.6 and 1.5 petrol engine (Z6/MZR/SKYACTIV), it is recommended to use 5w30 synthetic, 3.9 liters of oil are required.
Original Mazda 3 oil
According to official documentation, Mazda Original Oil Ultra 5w30 is filled into the gasoline engine from the factory. In a diesel engine - Mazda Original Oil Ultra DPF 5w30. Now the original oil for Mazda 3 engines is produced by Total. This oil is available in 1 l and 5 l canisters, article numbers: 053001TFE and 053005TFE. Please note: the canister may not bear Total brand markings. Previously, the original oil was produced under the Dexelia brand.
Oil for petrol and diesel engines Mazda 3
Mazda recommends using only engine oils manufactured under the company's brand. The same oils are also used for routine maintenance. But you have the right to use other liquids. The main thing is that motor oils meet the required tolerances.
Recommendations for MZR 1.6 engine 
Recommendations for SkyActiv 1.5 and 2.0 engine I agree with the same recommendations from Mazda, changing the oil within a range of 10 thousand kilometers occurs only in TO-0 and TO-1, that is, until the car’s mileage reaches 15 thousand km - then the engine oil is changed once every 15 thousand km. To change the oil you will need: for a 1.6 engine - 3.9 liters of oil, for SkyActiv-G 1.5 and 2.0 a little more - 4.2 liters.
Advice: after changing the engine oil, it will be useful.
Mazda 3 oil tolerances
The label of a canister from any manufacturer must indicate the type of oil and the so-called tolerances. If you find these designations (API), at least one of them, then the oil is fully suitable for your engine and meets Mazda requirements. For example, the original oil has the following characteristics: type: HC-synthetic; API classification: SL/CF; Viscosity (SAE): 5w30.
Please note: different engines have different tolerances.
| Engine (petrol) | Tolerances (API) | Viscosity |
|---|---|---|
| 1.6, Z6/ZM/MZR | API SL/SM/SN, ACEA A3/A5 | 5w20, 10w40, 5w30, 0w30, 0w20 |
| 1.5, SkyActiv, P5-VPS | API SM/SN, ACEA A3/A5, API SM/SN | 0w20 / 5w30 |
| 2.0, LF17 | API SL/SM/SN, ACEA A5/B5, API SM/CF / ACEA A3/B4, API SN/CF | 0w20 / 5w30 |
| 2.3, L3 Turbo | API SL, API SL/SM, ACEA A5/B5, ACEA A3/B3, ACEA A3/A5 | 5w30, 10w40, 5w20 |
Engine oil that meets Mazda requirements Also read on MazdaGid which oil
Changing Mazda engine oil can be carried out using different petroleum products. Some motorists choose only original lubricants. Others, due to various circumstances, prefer to fill the engine with engine oil similar to the original one.
Using the most expensive motor oil is sometimes impractical. To make the right choice, you need to accurately determine your own needs and take into account the technical characteristics of the motor.
Standards
It is not surprising that the manufacturer and official dealers recommend pouring only original oils into the engine. The manufacturer's strict recommendations apply exclusively to gasoline engines that are equipped in cars used in Europe. Accordingly, it is necessary to pour original Mazda Dexelia oils into such internal combustion engines. This petroleum product can be labeled as 5W30/10W40. Motorists claim that 5W30 is poured into Mazda engines more often than any other oil fluid.
The latest technologies have made it possible to create Ultra lubricants. These include synthetics intended for:
- gasoline engines (without or with catalysts, multi-valve, turbocharged);
- diesel engines that are installed in cars or minibuses (turbocharged, with direct injection and natural air intake).
What distinguishes the original oil is that it significantly saves fuel. This advantage is especially important in low-temperature conditions, when automotive lubricants retain six percent of the fuel.
Original MAZDA oil Ultra oils were specially developed for Mazda engines. They can be used in different operating conditions. They provide excellent protection for timing parts from rapid wear.
DPF lubricants are produced specifically for new diesel engines. They can be used in engines equipped with a soot filter.
What kind of oil to pour into a Mazda engine? Judging by information from many forums, the recommended option is 5W20. The exception is the Mazda 6 MPS, the engine of which cannot be poured with such lubricant. It is necessary to refer to the tolerances and select the oil according to the API SL or ACEA A3 range.
The above group may include petroleum products that are resistant to various influences and have a long service life. The driver usually uses it in harsh conditions, and they do not need to be changed frequently.
Gasoline internal combustion engines used outside Europe are not subject to strict manufacturer requirements. The approvals are as follows: API/SG/SH/SJ/SL, ILSAG GF-2/3.
What oil is better to pour into diesel power units? The manufacturer recommends using 5W30. It is not advisable to use other lubricants.
Selection of motor oil
In order to choose a good car oil for Mazda, you need to take into account:
- the generation to which the vehicle brand belongs;
- characteristics of the power unit (volume, type of fuel used, absence/presence of turbocharging);
- production date;
- vehicle mileage, operating conditions;
- lubricant change intervals;
- view of the mounted oil filter.
Functions of motor oil The best option is to fill in motor oil belonging to one of the following brands:
- "Aral High Tronik G";
- "Castrol Edge";
- "Mobil 1 Esp Formula";
- "Liqui Moly Top Tech";
- "Motul Expert";
- Shell Helix Ultra;
- "Zeke Top"
The viscosity coefficient of the above lubricants according to SAE is 5W30. Consumables in a Mazda engine need to be replaced every ten thousand kilometers or annually.
Online lubricant selection
For motorists who find it difficult to choose an oil, special websites can help. They provide faster and more specific choice of oil fluid.
Automatic selection of lubricant is especially useful for drivers who own a used car. In addition, it will be useful to owners of old cars who have lost their service books and manuals.
To find out what kind of lubricant to pour into an internal combustion engine, you will need to fill out a special form. You must enter in it:
- date of manufacture of the motor;
- vehicle make;
- body type;
- type of engine, its volume;
- VIN code.
It is worth remembering that original petroleum products differ from analogue ones by a higher price. Not every motorist can afford to purchase an original. You can't go too far in your quest to save money. You need to understand how to recognize a fake petroleum product. This way you will avoid pointless waste of your own money.
How to distinguish original car oil from a fake? The fake consumables have a different color and smell of burning. In addition, counterfeits are usually sold in suspicious retail outlets. Buy oil in normal stores so as not to come across a counterfeit product.
How much oil the motorist poured into the engine depends on the characteristics of the power unit. To clarify the amount of oil poured into the engine, contact an experienced motorist or service center employee. In general, beginners can be recommended to entrust the filling of fresh consumables to car service workers. In addition, if you purchased the car from an authorized dealer, you can entrust the vehicle maintenance to him. This is especially true for inexperienced motorists who have just started driving.
Motor oils have different classes, quality groups, and differ in viscosity characteristics. The variety of these parameters is due to differences in the types of engines of different car models. In this article, we will describe the recommended engine oil for Mazda 6, the use of which contributes to efficient engine operation.
Depending on the engine type, the Mazda 6 manufacturer recommends using various lubricants.
Gasoline car engines
For Europe, according to the vehicle operating instructions, it is recommended to use lubricants that meet the specifications:
- Original Mazda DEXELIA oil:
- oil type SJ in accordance with API classification;
- oil classes A1 or A3 according to the ACEA classification system;
- recommended viscosity 5W-30, used at temperatures outside the car from -29°C (and below) to +40°C (and above).
- Alternative lubricant:
- SL - in accordance with API standards;
- GF-III - according to ILSAC standard;
- viscosity 5W-20 is used in the temperature range from -29°C (and below) to +40°C (and above).
- oil types SG, SH, SJ or SL - according to API classification requirements;
- GF-II or GF-III - according to the ILSAC system.
The selection of lubricant viscosity for Mazda 6, except for European countries, is carried out according to scheme 1.
Scheme 1. Dependence of motor oil viscosity on ambient temperature.
Explanation of scheme 1:
- SAE 40 is used in the temperature range from +2°C (and below) to +42°C (and above);
- SAE 30 is used at temperatures from +2°C (and below) to +38°C (and above);
- SAE 20 or 20W-20 is poured if temperature conditions are from -12°C (and below) to +32°C (and above);
- 10W-30 is used if the thermometer shows from -25°C (and below) to +38°C (and above);
- 10W-40 is used in a temperature range from -25°C (and below) to +42°C (and above);
- 10W-50 is poured if climatic conditions are from -25°C (and below) to +48°C (and above);
- 20W-40 or 15W-40 is poured at temperatures from -12°C (and below) to +42°C (and above);
- 20W-50 or 15W-50 is poured if the air temperature is from -12 0 C (and below) to +48 0 C (and above);
- 5W-20 or 5W-30 is used if the thermometer shows from -29 0 C (and below) to +37 0 C (and above).
The volume of engine oil required when replacing is:
- Motors L8 or LF:
- 4.3 l including oil filter change;
- 3.9 without replacing the oil filter device.
- L8 auto engines:
- 3.5 l with oil filter change;
- 3.1 l without replacing the filter unit.
Diesel power units
- Branded DEXELIA motor oil with quality class CF according to the API system, having a viscosity of 5W-30, is poured at temperature conditions from -29 0 C (and below) to +30 0 C (and above).
- Branded DEXELIA motor oil that meets quality class CF according to API classification standards or B1 or B3 according to ACEA standards with a viscosity of 10W-40 is poured if the thermometer reading is from -20 0 C (and below) to +45 0 C (and above).
- An alternative motor fluid with quality group CD, CE or CF-4 according to API classification, or B3, B4 according to ACEA requirements may have a viscosity:
- 5W-30 is used in the temperature range from -30 0 C (and below) to +5 0 C (and above).
- 10W-30 is used if the air temperature ranges from -12 0 C (and below) to +38 0 C (and above).
Mazda 6 II GH 2007-2012
Gasoline power units
- Engine oils with a viscosity of 5W-30 are used at temperatures from -30 0 C (and below) to +40 0 C (and above):
- DEXELIA branded motor oil with quality class SL according to the API classification system or according to ACEA standards for motor oils of quality group A3/A5.
- alternative oil corresponding to API class - SL or SM or ACEA with quality group A3/A5.
- Motor oils with a viscosity of 10W-40 are used in the temperature range from -25 0 C (and below) to +42 0 C (and above):
- original DEXELIA lubricants corresponding to class SL according to the API classification system or ACEA quality group A3;
- alternative motor fluids that meet API - SL or SM or ACEA with quality group A3/A5.
- Motor oil 5W-20, poured at temperatures from -30 0 C (and below) to +27 0 C (and above), corresponding to API - SL or SM or ACEA with quality group A3/A5.
While the car is under the warranty period, you must use original Mazda DEXELIA motor lubricants with a viscosity of 10W-40 or 5W-30. If the power unit runs on non-original lubricant, then the factory warranty does not apply to the car engine.
The volume of engine oil required when replacing is determined by the type of Mazda 6 engine:
- Auto engines L8 and LF:
- 4.3 l including oil filter change;
- 3.9 l without replacing the filter device.
- L5 motors:
- 5.0 l with oil filter change;
- 4.6 l excluding oil filter replacement.
The manufacturer indicates that these volumes are approximate; the required amount of lubricant must be monitored using the dipstick when changing the oil.
Mazda 6 III GJ since 2012 (Skyactiv)
Gasoline car engines Skyactiv-G 2.0 and Skyactiv-G 2.5
In accordance with the operating instructions for the Mazda 6 car, it is allowed to fill in oils that meet the requirements:
- Mazda Original Oil Supra 0w - 20 is used in the temperature range from -35 0 C (or less) to +35 0 C (or more);
- Mazda Original Oil Ultra with a viscosity of 5w - 30 is used in temperature conditions from -30 0 C (or less) to +35 0 C (or more);
- An alternative motor oil that meets API standards - SN or SM with a viscosity of 0w - 20, is used in the temperature range from -35 0 C (or less) to +35 0 C (or more).
- An alternative lubricant corresponding to API classification - SL or SM or ACEA with quality group A3/A5 with a viscosity of 5w - 30 is poured at temperature conditions from -30 0 C (or less) to +35 0 C (or more).
The volume of lubricant required during replacement is:
- Engine Skyactiv-G 2.0:
- 4.2 l with oil filter change;
- 4.0 l without replacing the oil filter unit.
- Engine Skyactiv-G 2.5:
- 4.5 l with oil filter replacement;
- 4.3 l without replacing the filter device.
Diesel power units Skyactiv-D 2.2
According to the information provided in the manual for the Mazda 6, it is necessary to fill in original motor fluids with the following characteristics:
- Mazda Original Oil Supra DPF 0w - 30 if the air temperature outside the car is from -35 0 C (or less) to +35 0 C (or more);
- Mazda Original Oil Supra DPF 5w - 30 if the thermometer reading is in the range from -30 0 C (or less) to +35 0 C (or more);
The quality of alternative lubricants must meet the following parameters:
- according to ACEA classification - C3, with a viscosity of 0w - 30, used in temperature conditions from -35 0 C (or less) to +35 0 C (or more);
- according to ACEA standards - C3, with a viscosity of 5w - 30 is poured if the air temperature is from -30 0 C (or less) to +35 0 C (or more).
The volume of lubricant required when changing the oil is 5.1 liters with an oil filter change and 4.8 liters without replacing the oil filter.
The manufacturer of the Mazda 6 states in the manual that the use of an oil that does not meet the requirements reduces the operational period of the particulate filter; long-term use of such lubricant may result in damage to the DPF filter.
Conclusion
The recommended engine oil for Mazda 6 contributes to the vehicle's fuel efficiency and improves engine performance. According to the manual, the manufacturer selects the lubricant viscosity to ensure stable engine operation at different temperatures. It is recommended to buy low-viscosity motor oils for the winter, while thicker, all-season oils are poured for the summer at a moderate temperature range.
The suitability of a lubricant for a particular type of engine can be determined by the tolerances on the lubricant canister. In addition, when making an independent selection of motor oil, it is worth paying attention to the base fluid base; it can be synthetic, semi-synthetic and mineral.
If the machine is under warranty service, then only original Mazda lubricants can be used, otherwise the warranty does not apply to engine maintenance.
Mazda's current lineup of cars appeared in the early 2000s along with the company's new design code. The manufacturer's most popular models around the world are the Mazda 2/ Demio in the supermini class, Mazda 3/ Axela in the compact class and Mazda 6/ Atenza in the middle class. Currently, each of these models has three generations, in the first two the cars were built on platforms developed jointly with Ford and were equipped with gasoline and diesel engines of the MZR family with a volume of 1.3-2.5 liters (depending on the model and sales region). The third generation has Mazda's own platforms and new generation engines SkyActiv-G and SkyActiv-D. Most cars of these models have front-wheel drive, but there were some all-wheel drive modifications, such as the Mazda 6 MPS/ Mazdaspeed 6 and the Mazda 3 for the Japanese market. In Russia, both officially imported Mazda 2, 3 and 6, and used cars from Japan were in demand.
| Model | Type | Engine | Supra 0W-20 | Ultra 5W-30 | Ultra DPF 5W-30 |
|---|---|---|---|---|---|
| Mazda2 (DJ) | Petrol | 1.5 | + | + | - |
| Diesel | 1.5D | - | - | + | |
| Mazda2 (DE) | Petrol | 1.3/ 1.5 | + | + | - |
| Diesel | 1.4D/ 1.6D | - | + | - | |
| Mazda2 (DY) | Petrol | All engines | - | + | - |
| Diesel | 1.4 D | - | + | - | |
| Mazda3 (BM) | Petrol | 1.5/ 2.0 | + | + | - |
| 1.6 | + | + | - | ||
| Diesel | 2.2 D | - | - | + | |
| Mazda3 MPS (BL) | Petrol | 2.3 Turbo | - | + | - |
| Mazda3 (BL) | Petrol | All engines | + | + | - |
| Diesel | 1.6D | - | + | - | |
| 2.2 D | - | - | + | ||
| Mazda3 MPS (BK) | Petrol | 2.3 Turbo | - | + | - |
| Mazda3 (BK) | Petrol | All engines | + | + | - |
| Diesel | 1.6D | - | + | - | |
| 2.0D | - | - | + | ||
| Mazda6 (GJ) | Petrol | 2.0/ 2.5 | + | + | - |
| Diesel | 2.2 D | - | - | + | |
| Mazda6 (GH) | Petrol | All engines | + | + | - |
| Diesel | All engines | - | - | + | |
| Mazda6 MPS (GG) | Petrol | 2.3 Turbo | - | + | - |
| Mazda6 (GG&GY) | Petrol | All engines | + | + | - |
| Diesel | 2.0 D (with DPF) | - | - | + | |
| 2.0 D (with DPF) | - | + | - |
*The information in the table is provided for informational purposes: when selecting engine oil, you must rely on the recommendations of the car manufacturer.
MAZDA SUPRA 0W20
MAZDA SUPRA 0W20 engine oil was developed by TOTAL together with the automaker specifically for Skyactiv gasoline engines. It differs from conventional oils in its high fluidity, therefore it reduces fuel consumption and facilitates cold starting of the engine in frosty weather. MAZDA SUPRA 0W20 oil has protective properties and energy efficiency at the API SN and ILSAC GF-5 level according to the international classification. The automaker recommends this oil for gasoline Mazda models 2 (DE, DJ), 3 (except MPS) and 6 (except MPS).
MAZDA ULTRA 5W30
For Mazda 2, 3 and 6 with gasoline and diesel engines, with the exception of vehicles with a diesel particulate filter (DPF), MAZDA ULTRA 5W30 engine oil is intended, which has ACEA A5/B5 and API SL/CF property levels. It guarantees reliable engine protection against wear and harmful deposits even in difficult operating conditions, such as sports driving, city driving in start-stop mode and cold starts. This oil's resistance to oxidation maintains its effectiveness throughout the entire drain interval. MAZDA ULTRA 5W30 oil is recommended by the automaker for Mazda 3 MPS and 6 MPS with a 2.3 Turbo engine.
MAZDA ULTRA DPF 5W30
MAZDA ULTRA DPF 5W30 engine oil is designed for diesel vehicles of the brand equipped with a diesel particulate filter (DPF), which require Low SAPS oils with a reduced content of sulfated ash, phosphorus and sulfur. It guarantees the efficient operation of exhaust after-treatment systems and prevents their premature failure. The level of anti-wear and energy-saving properties of MAZDA ULTRA DPF 5W30 oil complies with the ACEA C2 standard.
Transmission oil for Mazda cars
MAZDA ATF-FZ transmission fluid is designed for Skyactiv-drive automatic transmissions. This oil is recommended for Mazda 6 (GJ), 3 (BM, 1.5, 2.0, 2.2D), 2 (DJ), which use this type of automatic transmission. It has improved friction characteristics and a high level of thermal-oxidative stability, therefore ensuring reliable transmission operation and smooth gear shifts.
For Mazda models 3 (BK, BL, BM 1.6), 6 (GG, GH, GY), 2(DE) with automatic transmission, the automaker recommends MAZDA ATF M-V transmission oil. It has high low-temperature fluidity, excellent thermal stability and full compatibility with transmission materials, and guarantees efficient operation of the automatic transmission in any operating conditions.
| Model | Type | Transmission | ATF M-III | ATF M-V | ATF-FZ |
|---|---|---|---|---|---|
| Mazda2 (DJ) | F.W.D. | CW6A-EL | - | - | + |
| Mazda2 (DE) | F.W.D. | FN4A-EL | - | + | - |
| Mazda3 (BM) | FWD (1.5/ 2.0 Petrol) | FW6A-EL | - | - | + |
| FWD (1.6 Petrol) | FN4A-EL | - | + | - | |
| FWD (Diesel) | GW6A-EL | - | - | + | |
| Mazda3 (BL) | F.W.D. | All | - | + | - |
| Mazda3 (BK) | F.W.D. | FN4A-EL | - | + | - |
| Mazda6 (GJ) | FWD (Petrol) | FW6A-EL | - | - | + |
| FWD (Diesel) | GW6A-EL | - | - | + | |
| Mazda6 (GH) | F.W.D. | FS5A-EL | - | + | - |
| Mazda6 (GG&GY) | F.W.D. | All | - | + | - |
| AWD | JA5AX-EL | + | - | - |
Find out more about
Hi all! In the coming month, we will completely devote our articles to the Mazda 3 (aka Axela). Today we will talk about Mazda 3 engine oil. I decided to write this article, since most car owners do not know what oil to pour into the Mazda 3 engine and use the one recommended by a neighbor in the garage or Uncle Vasya from the nearest car service center. And we will recommend what is required. Let's not waste time and get down to business right away.
Engine oil for Mazda 3 (1.5, 1.6, 2.0, etc.)
The line of Mazda 3 power units today is represented by both gasoline and diesel engines. Mazda 3 engine oil must first of all match the type of engine installed. Those. There are oils for gasoline engines and diesel engines, as well as universal fluids. Liquids are fundamentally different from each other. Hope this is clear.
Mazda 3 engine oil quality class (API, ACEA)
The next point is the quality class. For Mazda 3 gasoline engines, it is recommended to use oil with an API quality class of at least SL and ACEA A3/A5. Those. More modern oils are suitable, for example API SM and SN.
For diesel engines, the use of oils with quality classes according to API CF and ACEA B3 is required, but CD/CE/CF-4 and B3/B4 oils are allowed.
Mazda 3 engine oil viscosity
As for viscosity, Mazda 3 has fairly flexible requirements. This means that oil viscosity can vary significantly depending on the climate in which the vehicle is used. In cold regions, it is recommended to use oil with a viscosity of 5W20 or 5W30, and in warm regions where the air temperature does not drop below -15C, 10W40.
Well, here’s the most interesting thing. Manufacturer recommends pour oil into Mazda 3 engine Mazda Original Oil Ultra 5W30. This is the original oil produced by Total. Previously, the product was called Mazda Dexelia Ultra 5W30, but recently there was an update and the name changed. The oil is available in plastic canisters of 1l and 5l. articles: and accordingly. Using these articles you can find oil in online stores and order it.
Analogues of Mazda Original (Dexelia) Oil Ultra 5W30
Again, an equally interesting point in our article. Recommendation to fill original oil for Mazda 3 engine is only a recommendation and not a strict requirement. However, if the car is under warranty, then you will have to adhere to this recommendation. If you are not serviced by an official dealer, then you can safely fill in any suitable oil.
I am not a great expert or connoisseur of motor oils, but if I own a Mazda 3, I would choose the following oils.
1st place - Liqui Moly AA 5W30. This is a German product. Really high-quality hydrocracking synthetics with an excellent additive package. If there is a wide network of official representatives, it is difficult to run into a fake. On average, oil lasts up to 10,000 km. After which the life of the additives begins to decrease sharply. A significant disadvantage is the price. In retail stores in Novokuznetsk, such oil costs at least 2,500 rubles per 4 liters.
2. Place - Total Future NFC 9000 5W30 oil. A French product that, according to tolerances, fully corresponds to the original oil. Of course, because the original Mazda oil is produced by Total. At least the additive package definitely belongs to Total. There are not many fakes, the oil is not widespread and not everyone knows about it. Accordingly, the price is not that high. 1600-1700 rubles for 4 liters in retail.
3. Oil Mobil Super 3000 X1 Formula FE 5W30. A definite plus is price and quality, as well as ubiquity. Oil can be bought at any store. I repeat - in any case! However, there are a large number of fakes. And there is no escape from this. Demand creates supply. Hence the amount of counterfeit.
I won’t recommend anything else, because the taste and color... you understand. It is not the oil manufacturer itself that is important, but what is inside the canister. After all, we are not essentially interested in the canister, but its content is important. And everything that marketers impose on us is not always worth the money. I think there is no point in continuing further, since this is a matter of taste, preference and, of course, the budget that you are willing to sacrifice.
How much oil is in a Mazda 3 engine?
To answer the question how much oil is in a Mazda 3 engine a large amount of information was shoveled. But in the end, a large summary table was compiled, with which you can easily determine required volume of oil in a Mazda 3 engine. See the table below.
| Model | Modification | Code | Engine type | Engine model | Engine capacity l | Power, hp | Release dates | Oil volume |
| Mazda 3 I | 1.6 | BK12Z | BENZ | Z6 | 1,6 | 105 | 2004 - 2009 | 3.9 |
| Mazda 3 I | 1.6 Diesel | BK12 | DIS | Y601 | 1,6 | 109 | 2004 - 2009 | 3.10 |
| Mazda 3 I | 2.0 | BK12F | BENZ | LF17 | 2 | 150 | 2004 - 2009 | 4.3 |
| Mazda 3 I | 2.0 | 1BK_2 | BENZ | LF17 | 2 | 148 | 2004 - 2009 | 4.3 |
| Mazda 3 I | 2.0 Diesel | BK12R | DIS | RF7J | 2 | 143 | 2006 - 2009 | 4.3 |
| Mazda 3 I | 2.3 | 1BK_2 | BENZ | L3-VE | 2,3 | 171 | 2003 - 2009 | 4.3 |
| Mazda 3 I | 2.3 | 1BK_2 | BENZ | L3-VE | 2,3 | 156-160 | 2004 - 2009 | 4.3 |
| Mazda 3 I | 2.3 | BENZ | L3-V | 2,3 | 156 | 2007 - 2009 | 4.3 | |
| Mazda 3 II | 1.6 | BL_2Z | BENZ | Z6 | 1,6 | 105 | 2009 - 2013 | 4.3 |
| Mazda 3 II | 1.6 MZ-CD | BLA2Y | DIS | 1,6 | 116 | 2010 - 2013 | 3.9 | |
| Mazda 3 II | 1.6 MZ-CD | BL12Y | DIS | 1,6 | 109 | 2009 - 2010 | 3.9 | |
| Mazda 3 II | 2.0 | BL12F | BENZ | LF17 | 2 | 150 | 2009 - 2013 | 4.3 |
| Mazda 3 II | 2.0 | 1BL | BENZ | LF5H | 2 | 147-151 | 2008 - 2013 | 4.3 |
| Mazda 3 II | 2.2 MZR-CD | BL_2C | DIS | R2AA | 2,2 | 150 | 2009 - 2013 | 4.3 |
| Mazda 3 II | 2.2 MZR-CD | BL_2A | DIS | R2AA | 2,2 | 185 | 2009 - 2013 | 4.3 |
| Mazda 3 II | 2.5 | 1BL | BENZ | L5-VE | 2,5 | 166-170 | 2009 - 2013 | 4.3 |
| Mazda 3 III | 1.5 | BENZ | 1,5 | 111 | 2014 - present time | 3.9 | ||
| Mazda 3 III | 1.5 4WD | BENZ | 1,5 | 111 | 2014 - present time | 3.9 | ||
| Mazda 3 III | 1.5 Sky | BM_2A | BENZ | 1,5 | 120 | 2013 - present time | 3.9 | |
| Mazda 3 III | 1.6 | BM42Z | BENZ | 1,6 | 104 | 2013 - 2014 | 3.9 | |
| Mazda 3 III | 2.0 | BENZ | PEY7 | 2 | 150 | 2013 - present time | 4.3 | |
| Mazda 3 III | 2.0 | BENZ | 2 | 165 | 2014 - present time | 4.3 | ||
| Mazda 3 III | 2.0 Hybrid | GIBR | 2 | 99 | 2014 - present time | 4.3 | ||
| Mazda 3 III | 2.0 Hybrid | GIBR | 2 | 82 | 2014 - present time | 4.3 | ||
| Mazda 3 III | 2.0 Sky | BM427 | BENZ | LFX | 2 | 150 | 2013 - present time | 4.3 |
| Mazda 3 III | 2.2 D | DIS | 2,2 | 175 | 2014 - present time | 4.3 | ||
| Mazda 3 III | Skyactiv-D 150 | DIS | SHY1 | 2,2 | 150 | 2013 - present time | 4.3 | |
| Mazda 3 III | Skyactiv-G 100 | BENZ | 1,5 | 100-101 | 2013 - present time | 4.3 | ||
| Mazda 3 III | Skyactiv-G 120 | BENZ | PEY7 | 2 | 120 | 2013 - present time | 4.3 | |
| Mazda 3 III | Skyactiv-G 2.5L | BENZ | 2,5 | 188 | 2013 - present time | 4.3 |
That's all. Now you know, what kind of oil to fill in the Mazda 3 engine. We recommend that you familiarize yourself with other auto articles
