Symbols on the general climate air conditioner remote control. Climate control: what the buttons on the air conditioner remote control mean. Control via Wi-Fi or GSM
And now it has come, that happy day when you got an air conditioner installed. All you have to do is turn it on, and the device will surround you with its coolness. But don't think that using an air conditioner is easy.
Operating Basics
We approach this matter with all responsibility, and the first thing we do after installing the device is study the operating instructions. Each air conditioner needs its own manual, and the LG brand will never fit the instructions from Ballu.
User Guide
In this small book you can find all the information you need: how to turn the device on and off, how to set the desired operating mode, how to properly care for your new assistant in the house.
Turn the device on and off using the remote control or without
In order to operate the device, manufacturers strongly recommend using only the remote control. As for window air conditioners, it all depends on the model and location in the window. If the device is located at the bottom of the window, you can control it using the buttons on the panel. Is the block assigned a place at the top of the frame? Then to configure its operation you need a remote control.
Attention! You cannot turn the air conditioner on/off by inserting/unplugging the plug from the socket.
On the remote control we find the power button, it is designated “On/Off”, after pressing which the device will start or stop working. But there are situations when the remote control is broken, lost, or the battery is dead and there is no spare. Then we find a control panel on our air conditioner, almost always hidden from view. It is located on the indoor unit under the curtains. There is always a button for such an emergency activation; it is often illuminated in green or red. Depending on the manufacturer, it may be designated as “on/off” or “operation”. You need to press on it and hold it in this state for a few seconds, after which the air conditioner will turn on with a characteristic sound and begin to cool the room. If you need to set the device to heating mode, press the power button again. To complete the work, we proceed in the same order - press and hold for a couple of seconds. This completes the functionality of the control panel; changes can only be made using the remote control.
We set the operating mode of the air conditioner (heating/cooling). Explanation of icons
You can set the air conditioner to the desired operating mode, of which there are quite a few, using the control panel. For example, for heating the algorithm is as follows:
- Find the button on the remote control labeled “HEAT” and press it.
- If there is no such inscription, then we find the “MODE” icon; using it, the modes indicated by a snowflake, sun, fan and droplet are switched. We scroll through until we find what we are looking for - the sun, because we need heating.
- You can set the desired temperature using the “+” and “–” buttons.
- The device will not start heating the air immediately, it should take about 5–10 minutes.
The cooling temperature can be adjusted in the same way.
Controlling the air conditioner using the remote control In addition to the buttons described, there are many others on the remote control. For some, even after several years of operation, they remain a mystery, but we will decipher them now.
- HEAT (or “sun” icon) – heating mode,
- COOL (or snowflake icon) – cooling mode,
- DRY (or “drop” icon) is an air dehumidification mode when the air conditioner removes excess moisture from the room.
- FAN (or “fan” icon) is a ventilation mode that determines the blowing speed. An air conditioner distributes air throughout a room without heating or cooling it.
- TURBO - enhanced fan operation mode,
- SLEEP (or “star” icon) is a sleep mode during which the fan begins to rotate more slowly, which ensures the absence of noise. The device also regulates the temperature itself, making it comfortable for sleeping.
- SWING - using this button you can change the direction of the curtains,
- TIMER (or “clock” icon) – a timer that allows you to set the temperature parameters in advance and configure the unit to turn on/off independently.
- CLOCK - time setting,
- LOCK - lock the remote control,
- LED - remote control backlight.
Operating conditions: at what temperatures does it work, how to prepare for winter
Almost all modern air conditioners are capable of not only cooling the air in the room, but also operating in heating mode, which is very convenient between seasons when the heating is turned off. However, there are certain conditions under which the device can operate.
So, the temperature outside should not be higher than +40°C and lower than -10°C. Experts insist that it is impossible to use air conditioners in winter at all, since the oil that is added to the refrigerant thickens.
But there are some device models that can operate even at a temperature of -25°C (outdoors). These are the Mitsubishi Electric and Daikin brands. How do you know if your air conditioner can work in winter? To do this, you need to carefully study the manual, and especially pay attention to the operating temperature range. The maximum numbers at which the device can be turned on will be indicated there.
The operating temperature of inverter air conditioners in the “cooling” mode is from -10 to +45, in the “heating” mode - from -15 to +24.
Non-inverter units will operate for “cooling” - from +21 to +43, for “heating” - from -5 to +24. As for window models, the permissible temperature for “cooling” is from +18 to +45, “heating” is from -3 to +24 (outdoor temperature is indicated). It is recommended to turn on the “drying” mode at temperatures from +11 to + 43.
What other problems may arise when using the air conditioner in heating mode at temperatures below 0°C? This is glaciation of the outer block. This occurs due to the release of condensation, which begins to freeze directly on the device outside. If, at similar low temperatures, you turn on the device for cooling, then you can expect a decrease in the performance of the device, complete freezing of the external part and breakdown of the compressor.
Icing of the external block of the split system
Experts also advise that in hot weather, set the cooling mode within 21–23°C. This will help protect the compressor and your health due to the small temperature difference between indoors and outdoors. Prevention and Maintenance
Air conditioner maintenance involves regular cleaning of the indoor and outdoor units, disinfection and refilling/refilling with refrigerant if necessary. Experts advise doing this at least once a year.
In addition, a preventive inspection is carried out in order to notice malfunctions in time, replace parts, lubricate the mechanism, check equipment for leaks, and more.
- You can read more about this in the article “Do-it-yourself air conditioner maintenance.”
- If the device is not planned to be used in winter, then it needs to be “mothballed” and prepared for cold weather:
- Turn on the air conditioner to the “Ventilation” mode and leave it running for at least 2 hours. This will remove all moisture from the radiator.
For window air conditioners, it will be enough to cover the part located on the street with film or other material designed to shelter things from external influences. But sometimes, even after the manipulations have been done, cold air still enters the room through the device, then the unit is removed for the winter.
Do you plan to operate a split system in winter? In this case, we purchase an additional “winter kit”. It consists of three important elements: a fan speed controller, drain tube heaters and a compressor. They prevent the blocks and the system from freezing, and also regulate the pressure in it. But it is worth warning - under these conditions the device will only operate in cooling mode! This is true in stores and catering establishments.
Split system service life
Air conditioning in the house How long a split system will last depends not on luck, but on certain factors. The average lifespan is 5–10 years, but this may vary due to:
- Quality and reliability of the air conditioner. Of course, an ultra-high reliability device from the MITSUBISHI ELECTRIC brand (made in Japan) will last much longer than a device from the Delonghi brand (China).
- Installation quality. In the summer season, when the issue of cooling is very pressing, many fly-by-night companies open, offering inexpensive installation of air conditioning. Very often it turns out that the installation was carried out poorly, and this leads to premature failure of the device itself.
- Operating conditions. If your air conditioner is running at full capacity 24/7, this can shorten its lifespan.
- High-quality and timely service. Regular cleaning of the device and replacement of the refrigerant will extend the life of the device.
If you follow the basics of operation, the air conditioner will definitely meet the owner’s expectations and will work flawlessly throughout its entire service life.
Air conditioning has become an integral part of the daily lives of most people. It is used at home, in offices, shopping centers - almost everywhere. With its help you can easily and quickly both cool and heat a room. But with huge demand, most consumers do not really know about all its capabilities. No fewer people have little understanding of the symbols of the buttons on the air conditioner remote control. This article will help you understand this issue.
Types and features
Air conditioner remote controls are divided into:
- infrared;
- wired.
Infrared remote controls are those that transmit a signal through radiation. This system is used in wall-mounted split systems, cassette, ceiling air conditioners, as well as in some models of window air conditioners. Infrared remote controls are convenient to use, but their range is limited to 8 meters, and it must be taken into account that after 5 meters malfunctions may occur due to bright lighting. This type of control is not suitable for systems installed above the recommended values, as well as for those models whose internal units are hidden behind suspended ceilings or plasterboard structures.
Infrared remote controls have a self-diagnosis system, so during a failure, the indicator lights on the internal unit of the split system begin to flash, thanks to which the service department will need less time for diagnostics and repairs.
Wired ones control the air conditioner at any distance. If there is a malfunction, an error code is displayed on the display, which makes diagnostics even easier than with an infrared remote control. The wired type of control allows you to control the operation of 4-8 air conditioners. Some models also include a temperature sensor to help ensure optimal performance.
NEAT
Regardless of the manufacturer of the split system, you can highlight the main symbols on the air conditioner remote control.
NEAT - heating, temperature up to 30 degrees. This mode is used to heat indoor air. It is marked on the air conditioner control panel in the form of a sun. The program automatically adjusts the temperature to the set temperature as soon as it starts to drop. It is important to know that each device has its own limitations when used in cold weather. Operational restrictions can range from -5 to -15 degrees depending on the technical characteristics of the air conditioner. Do not neglect the rules for operating the device to avoid breakdowns. When choosing an air conditioner, it is important to know the conditions under which it can be used. There are models that have no restrictions.
COOL
This mode cools the room in hot weather to 16-18 degrees. This function is considered the main one and is present in any air conditioner. It is marked on the air conditioner remote control in the form of a snowflake. Cooling occurs thanks to the filled refrigerant, which slowly takes heat from the room due to gas formation and releases warm air to the street. The power of the air conditioner should be selected at the rate of one kilowatt per 8-10 square meters, under such conditions the device will work most optimally. When using the cool mode, the most favorable temperature is 16-18 degrees; if this is not enough, you can turn on the fan.
DRI
The dehumidification function is designed to change the set temperature by several degrees for active removal in the room. This mode is identical to COOL, but at very low fan speeds of the indoor unit of the split system. Combining the function with room cooling means providing more comfortable air. The DRI mode helps to quickly dry the space and get rid of high humidity, make it easier to tolerate heat and stop the development of mold. Some air conditioner models have special sensors that automatically turn on this function if there is a deviation from the norm. For example, there is this designation on the Gree air conditioner remote control. In this mode, humidity levels cannot be programmed and maintained.
Air dehumidification occurs in this way:
- The fan is active for the first 10 minutes.
- The next 5 minutes are on pause.
- Then intensive ventilation is carried out for 2 minutes.
This mode should not be used near open sources of moisture, such as a swimming pool. In this case, other drying methods should be used.
FAN
The function is similar to a fan; it is used to change the blowing speed of the air conditioner. In this mode, cooling and heating equipment does not function, but only air is taken from the street. Suitable for houses with central heating. In some models, you can only turn on the ventilation of the room without taking air from the street. Manufacturers most often provide customers with a choice of 3 rotation speeds, and the mode independently selects the most suitable blowing speed.
AUTO
The function maintains a room temperature of 22-24 degrees, as it is considered the most comfortable for humans. The set value is adjusted every half hour. In this mode, temperature indicators are not displayed on the control panel display.
TURBO
A mode in which air flows at high speed throughout the room. If it is possible to turn off the air intake from the street, you can quickly mix the layers of air. This way the room temperature will be the same.
SLEEP
The mode is used during sleep to create favorable conditions. In this mode, the temperature changes over 6-8 hours, gradually increasing or decreasing the air temperature by 1 degree in order not to overcool or overheat a sleeping person. If the air conditioner works for heating, then the temperature increases, if for cooling, it drops.
SWING
Using this mode, you can fix or change the position of the split system blinds. Thanks to this mode, the air is distributed evenly throughout the room. Some remote controls display the movement of the blinds.
AUTORESTART
This mode is not indicated on the control panel, but its presence is very important. This program is triggered in the event of an unexpected power outage, automatically resuming the operation of the air conditioner in the specified mode when electricity appears again.
Standard modes
The main functions of an air conditioner are: dehumidification, cooling and heating of indoor air. The modes and their designation on the air conditioner remote control should be studied in advance in order to know the technical capabilities of the equipment. Cooling occurs due to the transition of the liquid state of the refrigerant into the gaseous state, which is carried out due to the intake of warm air from the room, and when heating the process occurs in the opposite way.
Each air conditioner has basic modes and additional ones, which directly depend on the manufacturer and model of the device. Designation of icons on the air conditioner remote control:
- Cool - cooling, looks like a snowflake.
- Heat - heating, indicated on the air conditioner remote control with a sun.
- Dry - drying, image of a drop.
- Fan - a fan with a corresponding design.
- Sleep - night mode, star image.
- Lock - child protection.
- Led - display backlight for working in the dark.
Special abilities
Some manufacturers, in pursuit of consumers, are trying to improve air conditioners with additional options. Some of them become very useful after use. So, special features include:
- Comfort setting - can turn on the air conditioner to calculate the optimal mode. As a rule, in this mode, 20 degrees is considered optimal for heating, 25 degrees for cooling the room.
- Air purification - occurs thanks to built-in filters of varying degrees of purification. It can be coarse - it helps to remove large particles of dirt, and fine - it can even cope with flower pollen. In addition, the air conditioner can be equipped with filters that absorb odors. Street dust settles on the filters, and the air in the room always remains fresh. This designation can be found on the Samsung air conditioner remote control.
- 3D flow - directs vertically. The consumer uses this function when he is afraid of catching a cold. It will be marked lfeel on the air conditioner remote control.
- Ionization - saturates the room with ions with negative charges. The option is intended to improve a person’s immunity and well-being. Reviews from some consumers say that during ionization a feeling of breeze appears. There is this designation on the LG, Mitsubishi air conditioner remote control in some models
- Filtration and air purification - this function is not available in all air conditioner models; it is carried out using step filters. It helps clean the air from dust, dirt and various microorganisms, and also helps get rid of unpleasant odors. This function is indispensable for people prone to allergies and pet owners.
- Defrosting the heat exchanger - maintains the performance of the air conditioner for a long time. In this mode, during cooling, the load on the refrigerant during cold collection is reduced.
The set of additional functions directly depends on the manufacturer and model of the split system. The symbols on the Mitsubishi air conditioner remote control will differ from the same meanings from other manufacturers. Before purchasing a unit, you need to consult with the seller or familiarize yourself with the options using the instructions included in the kit.
So, each air conditioner is equipped with the following functions: dehumidification, heating and cooling of air. In addition, each manufacturer tries to surprise the consumer and diversify the capabilities of the device. Therefore, when choosing an air conditioner, it is important to study the set of functions of the model you like.
Air conditioner manufacturers often allow you to save on the purchase of separate dehumidifiers by integrating them into their devices. A regular household “split” may be enough to normalize the percentage of moisture in the air. Let's figure out how the air conditioner works in drying mode and for whom this function may be useful.
How to turn on the air conditioner “drying”
To start the drying process, you need to turn on the Dry function on the air conditioner (Dry in Russian means “draining”). This mode is very similar to the air cooling mode.
- The radiator of the indoor unit is cooling.
- warm air comes into contact with its surface. Resulting in moisture contained in the air settles in the form of condensation on the surface of the radiator.
- the device collects condensate and removes it outside the room using.
In theory, with such an algorithm, the temperature in the room should decrease, which is not always necessary. To avoid this, the drying device works as follows:
Step-by-step instructions for turning on the air conditioner in drying mode
Before turning on the air conditioner, make sure that it is connected to the mains (the plug is plugged into the socket or the corresponding circuit breaker is turned on in the electrical panel). Next, take the control panel:
When is it needed?
Dehumidifying a room may be necessary in several situations:
Humidity and well-being
Even if you were born in a region with high humidity, being in a room where it deviates from the optimal level of 45-65% is fraught with unpleasant consequences. A person’s risk of allergic reactions increases, and rhinitis or asthma may become more active.
On the contrary, if the air is too dry, it will lead to dry throat and respiratory tract, skin problems, and increased fatigue. This has a particularly negative impact on young children.
Therefore, the Dry mode must be used wisely - do not overdry the room, and use this function only when the humidity is really high. Focus on a moisture content of 50% at a temperature of 18-20 degrees.
The modes installed in the air conditioner determine the capabilities and “talents” of this climate control equipment prescribed by the manufacturer. Each model has a set of basic (general) settings for this type of device, but there are also additional options. The modes of any air conditioner are aimed at creating a favorable atmosphere in the house.
Any control is carried out using a remote control, with the exception of window models that have a push-button control panel. However, some of the indicated commands require translation into Russian. For user convenience, graphic icons are shown next to the buttons on the remote control.
The main operating modes of the air conditioner are present in every standard device. Among them are the following:
- cool (translated as “cooling”) – indicated by a snowflake;
- heat (for heating) with a sun icon;
- dry mode (drying mode in any air conditioner) with the image of a drop;
- fan (ventilation) with a fan icon;
- sleep (night mode) with an asterisk designation;
- timer with a picture of a clock;
- swing – the meaning is to change the direction of the curtains;
- lock – lock the remote control from children;
- LED – illumination of the remote control for working with it in the evening and at night.
Cooling
This is the main mission of any air conditioning device. The air conditioner mode is implemented as follows: the refrigerant poured into the device gradually turns into gas, taking heat from the room. This cools the air entering the room.
The following formula will help you correctly calculate the air conditioning power of the purchased device: for one kilowatt the area is from 8 to 10 square meters.
Subject to these conditions, the device will provide optimal cooling in the apartment. Important tip
: when this function is launched, the temperature of the split system is set to approximately 16-18 degrees. If it is not enough, connect a fan. The temperature can vary within 0.5 degrees (higher and lower).
- When the outside temperature is below zero, it is important to observe the following nuances:
- reduce the power of the device from time to time;
- monitor water drainage;
Keep in mind that changing modes takes longer.
It is best not to run this function in winter.
Heating Many air conditioners can operate in heating mode, which is best launch in the off-season
In autumn and spring, in heat mode, 3-4 times more heat is released compared to the electricity consumed. But in the winter season, negative temperatures change the properties of freon and compression oil - which is why the device may even fail. Of course, you can purchase a special low-temperature (winter) kit or initially buy a model with a heating element for heating, but along with their use, your electricity bills will also increase.
Why is dehumidification necessary?
Thanks to this function of the air conditioner, excess moisture is removed from the room. Drying makes it easier to cope with heat and prevents the formation of mold. As a result, stuffiness disappears and it becomes easier to breathe.
The dehumidifier operates as follows:
- the air conditioner dries the air for the first 10 minutes;
- the device does not work for the next 5 minutes;
- then increased ventilation occurs for 2 minutes.
It is very important that there are no additional open sources of moisture in the room - for example, a swimming pool. Here, air drying capabilities will not help; the use of other specialized equipment is necessary.
The device operates in cycles: from air drying to cooling. As soon as the required temperature has been established in the room, the device begins to dehumidify the air again.
Increased airflow
The ventilation mode in any air conditioner is an indicator of the blowing speed. Air flows are distributed throughout the room, without cooling or heating it.
In modern models, the fan is adjustable - for this there is additional TURBO mode. When it is turned on, air currents begin to rush around the room at greater speed. And if you turn off the air intake from outside, then when ventilating, the device will mix different air layers that have different degrees of heating (the air at the top will be warmer, and the air at the floor will remain cooler).
Silent night settings
Another name is night mode: it provides for a reduced noise level at night. In fact the fan just starts rotate at a slower speed, it turns out almost silently. But the required temperature remains unchanged, fluctuations are possible within one to two degrees.
Another name for the night mode is Quiet, comfortable sleep. It is also characterized by reduced energy consumption.
Timer
Another must-have function that will allow you to set the temperature before the user arrives home. It also shuts down the split system after the required amount of time has passed.
Swing
This feature helps uniform distribution of air volumes throughout the room. By the way, the dampers can be fixed in any one position. And for a more clear picture of what is happening with the equipment, the corresponding movements of the blinds are displayed on the remote control screen.
Special abilities
They are not implemented in every model. However, many of them turn out to be very interesting and useful when tested.
How to select the required function
After the information received, all that remains is to find out how to choose this or that function. It's simple:
- select the corresponding button on the remote control;
- if it is not there, then you can select the current mode using MODE, flipping through until we decide on what we need;
- the current temperature is set using the plus and minus buttons;
- The user will not feel the specified action immediately, but after about 5 minutes.
The most popular air conditioners of 2018
Split system Haier AS12NS4ERA / 1U12BS3ERA
Split system Haier AS09NS4ERA / 1U09BS3ERA
Split system Mitsubishi Electric MSZ-LN25VG / MUZ-LN25VG
Split system Electrolux EACS/I-09HSL/N3
Split system Electrolux EACS-07HAT/N3
Split system Electrolux EACS-12HSL/N3
Almost every home now has an air conditioner. Devices vary in price and functionality. Among the large number of programs, not all of them are understandable to the average user, and the instructions are often written in technical language that is understandable only to narrow specialists. Let's try to figure out what functions are present in our air conditioners and what they are needed for. Among the many “skills” of an air conditioner, there are functions that raise the most questions. Let's look at them exactly. The dry function in the air conditioner offers dehumidification of the air in the room. This helps when there is high humidity in the room. It is especially useful to use this function in spring or autumn, when it rains a lot and the humidity is very high. The heat function in an air conditioner is to heat the room. Fan function - turns on ventilation. In this case, only the fan operates, without heating or cooling. It’s clear why these functions are needed. The question remains, how does it work? After all, many turn to customer service because they cannot figure it out, either it is not working correctly, or they have misunderstood the purpose. There are quite a lot of air conditioners with a dry function on sale now. So, let's look at the principle of operation of this mode. The design includes a special valve that distributes freon pressure in a certain way. As a result, the upper part of the evaporator heats, and the lower part collects condensate. In turn, the fan mixes cold and warm air. As a result, the air conditioner blows a warm, dry stream. The condensate drains independently through a special hose to the street. The mode is used without reducing the temperature. This allows you to maintain a comfortable microclimate in the room, while reducing humidity. In addition, using the dry mode for drying prevents the formation of fungus and mold and reduces the risk of colds. Can maintain indoor humidity between 35 and 60%. Sometimes users try to reduce humidity using an air conditioner without this function. Here the disadvantages immediately become obvious - without lowering the temperature, drying does not occur. This feature helps heat the room when it gets cold. The user sets a certain indicator below which the room temperature should not fall. The air conditioner maintains it by periodically starting and stopping the heating. Important! Before starting the device in winter (at sub-zero temperatures outside), carefully read the instructions! Models have a limitation on starting at low temperatures! Many air conditioners can operate for heating when the outside temperature is down to -5. Turning on the device at lower values entails a breakdown, maybe not instantaneously, but quickly. If you are interested in heating the room in winter, you should familiarize yourself with the maximum and minimum temperature limits before purchasing. If you already have an air conditioner that cannot work, for example, at -10 degrees, this is not yet a reason to go for a new one. Most models, even budget ones, can be upgraded. There are special winter kits that allow you to increase the temperature range of the device. So even an inexpensive air conditioner can act as a heater at -20 degrees. This function allows you to adjust the intensity of the air supply. In “fan” mode, only the fan operates, without heating or cooling. Some models, therefore, provide not only ventilation, but also ionization, cleaning, oxygen saturation, etc. Accordingly, these devices cost a little more and require refilling. We hope you now understand the exact purpose of these functions and how they work. Whether you personally need them is another question. Enjoy! How does it all work?
Dry
Heat
Fan
Conclusion
Name Hisense AS-09UR4SYDDB1G
Type inverter wall split system inverter wall split system inverter wall split system inverter wall split system
Serviced area up to 30 sq. m 12-30 sq. m up to 22 m² up to 20m² up to 30m²
cooling power 2600 W / heating 2650 W 2050 W 2600 W / heating 3500 W cooling power 2500 W / heating 3200 W cooling power 2800 W / heating 2800 W
Additional modes ventilation mode (without cooling and heating), automatic temperature maintenance, self-diagnosis of faults ventilation, temperature maintenance, night, dehumidification mode ventilation, temperature maintenance, night, dehumidification mode ventilation, temperature maintenance, night, dehumidification mode
price from 23400 rub. from 31,000 rub. from 18,000 rub. from 60,000 rub. from 42800 rub.
Where to buy
