If you buy daytime running lights, then they are the best in all respects. DRL (Daytime Running Lights) Daytime Running Lights Ice
Initially, DRLs (daytime running lights, another name is drl lights) were invented in Canada and were first used there. The first DRLs looked a little different: the high beam lamp was used as a light source, which burned 50% “quieter”, or only the low beam was turned on. In both the first and second cases, only the headlights and side lamps worked, and the taillights did not light (only the brake lights worked, which were not “masked” by the side lights).
Principle of operation
When the general (low) beam was turned on, all the lights in the car came on, including the low beam and side lights. At the same time, the service life of the lamps decreased, the load on the generator increased, thereby we get an undercharged battery and a short service life of marker and lighting lamps. By using DRLs as a source of daylight, we get a longer service life of the car's standard lamps and a always charged battery. Also, with a low load on the vehicle’s on-board network, fuel consumption decreases. 
In our store you can order and buy daytime running lights in Moscow. By consuming a minimum of electricity, DRLs save voltage in the on-board network, thereby maintaining the battery in a charged state. Modern DRLs are made using COB (light emitting diode) technology, are lightweight, have minimal current consumption and have a long service life. Also, daytime running lights in Moscow have a reasonable price. DRL is a practical and irreplaceable thing for every car owner.
Legality of daytime running lights
The traffic rules that are in force today require driving vehicles with their headlights on. Among the equipment designed for car lighting, daytime running lights are popular. Why have they become so widespread? It's all about the advantages of LED lights, which include:
- universal installation method for all cars
- small size running lights
- bright light at low power consumption, etc.
Advantage of DRL
LED modules have a significantly longer lifespan than halogen modules, because their quality is much superior to conventional light bulbs. Daytime running lights are a one-piece unit that most often looks like a ready-to-install unit. You are unlikely to be able to find LED lamps separately from the entire DRL design, which is why daytime running lights are usually changed completely. In the assortment of our online store you will find various models of DRLs, which you can buy by leaving a request on the website or by calling. Our consultants will help you choose the right model and install it for high-quality car lighting.
Well, we got excited about “all”: demand has created such a supply that it is simply unrealistic to buy and test all the models. This, by the way, was clearly visible at the Automechanika and Interauto exhibitions held in Moscow. We decided to select samples with different characteristics: cheap and very expensive, with and without control units, rectangular and round, plastic and metal...
Everyone unanimously promises increased road safety and energy saving (the latter is absolutely true). Moreover, the smaller the contribution to safety, the greater the savings - not only energy, but also money. No wonder: weak LEDs are cheap and consume almost no electricity. Not blinded by the light (often very dim), your eyes literally run wild, but it is clear: you can choose a flashlight that is most suitable in design and mounting method for any car.
In general, there were a dozen products, both branded and no name. The latter is in the literal sense: neither the manufacturer nor the country of origin advertised themselves. But many loudly declare full compliance with the requirements of ECE R48. But there is one trick here: the mentioned EU rules (and the corresponding GOST R 41.48–2004) apply to the installation of these lights, but not to them themselves. But the requirements for DRLs are set out in another document: ECE R87 (GOST R 41.87–99). It says exactly how brightly and where the correct flashlights should shine, what the color of their glow should be and the visible surface area.
It is these requirements that most manufacturers of cheap DRLs stumble on. Only very powerful and expensive LEDs can provide the luminous intensity of each flashlight within the range of 400–800 cd. It’s easier with the total visible luminous surface, which should be at least 40 cm². But, apparently, the authors of a number of products do not attach importance to such “trifles” - after all, their flashlights are dim anyway, and where there is one violation, there are two...
YOU WILL NOT CHECK THE REAL BRIGHTNESS OF THE DRL IN THE STORE. CHOOSE FLASHLIGHTS WITH A METAL CASE: POWERFUL LEDS ARE ONLY INSTALLED IN THIS CASE.
The products are arranged in ascending order of their cost.
Super 6 LED sports TTX-1015
Origin China
Approximate price 475 rub.Number of LEDs 6
Current consumption 140 mA
Luminous intensity 18 cd
Diffuser dimensions 115 × 10 mm
The frail LEDs in the plastic casing shine extremely dimly, the mounting is unreliable, and the luminous area is almost half the normal size. They are attached to the bracket with Velcro, and it is attached with two self-tapping screws.
LED Daytime Running Light BF-201
Origin unknown
Approximate price 1000 rub.
Number of LEDs 4
Current consumption 120 mA
Luminous intensity 80 cd
Diffuser dimensions Ø 70 mm
Plastic flashlights are attached to brackets with adjustable angles and to the bumper with self-tapping screws. The light is weak. Thank you, at least we didn’t save on the reflector area.
SONG-YE
Origin unknown
Approximate price 1045 rub.
Number of LEDs 8
Current consumption 360 mA
Luminous intensity 27 cd
Diffuser dimensions 155 × 17 mm
The instructions say: 100% Waterproof, but the pictograms on the box prohibit washing plastic lanterns in any way other than with a sponge, and without shampoo! The light is weak.
Maxlight M320D
Origin unknown
Number of LEDs 20
Current consumption 260 mA
Luminous intensity 108 cd
Diffuser dimensions 185 × 25 mm
The yellow wire indicated in the diagram for connecting to the side lights... is missing! The light is rather weak, but the luminous area is within the standard. Fastening of plastic lights is on a bracket, with adjustment.
DRL F1
Origin unknown
Approximate price 1425 rub.
Number of LEDs 8
Current consumption 480 mA
Luminous intensity 54 cd
Diffuser dimensions 150 × 20 × 50 mm
(curved in the shape of a club)
The instructions indicate the possibility of automatic disconnection from the dimensions, but it is not shown in the diagram or in real life. The light is dim, the size of the light spot is normal. Fastening to a vertical wall, on two through hollow bolts (wires are routed through them). The body is plastic.
Egolight PL-8
Origin China
Approximate price 1615 rub.
Number of LEDs 8
Current consumption 100 mA
Luminous intensity 55 cd
Diffuser dimensions 155 × 20 mm
These plastic DRLs have no brightness at all. Mounting on brackets, with adjustable angle of inclination, then - Velcro or self-tapping screws.
LED Daytime Running Light NIUDI ND-06
Origin China
Approximate price 1990 rub.
Number of LEDs 5
Current consumption 600 mA
Luminous intensity 140 cd
Diffuser dimensions 220 × 30 mm
It provides the ability to automatically turn off when the side lights are on, but there is ambiguity in the color designation of the wires. There are sealed connectors. Alas, the light is weak, and even one and a half extra luminous area does not help matters. Fastening of plastic lanterns is at the corners.
DRL Tiger Narva - Choice of air defense!
Origin China
Approximate price 2900 rub.
Number of LEDs 4
Current consumption 470 mA
Luminous intensity 533 cd
Diffuser dimensions 125 × 25 mm
The included ECU automatically turns on when the voltage is above 13.7 V (this allows you to connect directly to the battery) and turns off when the lights are turned on. The brightness meets the standards, as does the area. Aluminum lamps are mounted on brackets with latches.
STARLED AL-WL9B
Origin unknown
Approximate price 3000 rub.
Number of LEDs 9
Current consumption 1280 mA
Luminous intensity 554 cd
Diffuser dimensions Ø 37 mm
The projector optical system and powerful LEDs in an aluminum casing helped to meet the requirements for the brightness of the flashlights, but the luminous surface area is small. Mounting - on a bracket (at any angle) or with a rear bolt.
OSRAM LED LIGHT@DAY - Choice of ZR!
Origin Romania
Approximate price 5500 rub.
Number of LEDs 2 (with light guide)
Current consumption 1170 mA
Luminous intensity 640 cd
Diffuser dimensions 160 × 30 mm
The supplied ECU allows you to implement both a complete shutdown when the lights are on, and a decrease in brightness. Aluminum DRLs automatically turn on when voltage is above 13.6 V. Sealed connectors, fuse. Fastening - on brackets with latches.
Philips LED DayLight8
Origin Taiwan
Approximate price 7000 rub.
Number of LEDs 8
Current consumption 1060 mA
Luminous intensity 566 cd
Diffuser dimensions 160 × 18 mm
A high-quality product in aluminum cases automatically turns on when the voltage in the on-board network increases above 13.5 V. Automatic shutdown or dimming of brightness is implemented when the lights are on. Fastening - with latches to the bracket and two self-tapping screws. Eh, if only these lanterns were cheaper...
HELLA LEDayFlex 8
Origin Taiwan
Approximate price 13,380 rub.
Number of LEDs 8 (in eight separate housings)
Current consumption 1000 mA
Luminous intensity 690 cd
Diffuser dimensions Ø 30 mm
Here the ECU only implements a shutdown when the lights are on, but it needs to be connected to the ignition terminal, not the battery. Attention: the black wire is... a plus! The expensive kit contains neither brackets nor a cable for connecting to the on-board network. The brightness of aluminum flashlights and the total luminous area are normal. If you have skillful hands, you can assemble some kind of design from flashlights, but you will have to tinker with the installation.
QUESTION ANSWER
- How to choose the best form of DRL?
Generally speaking, this is a matter of taste. But we must keep in mind the requirement of GOST 41.87–99: the total area of the luminous surface of the DRL must be at least 40 cm². For rectangular lanterns it is easy to measure it with a ruler, but round ones should have a diameter of at least 50 mm.
- How can I connect the DRLs myself so that they light up when the ignition is turned on, but do not light up when the headlights are on?
Let's offer a couple of simplest solutions. In the case of low-power DRLs, you can get by with just one diode, see. scheme 1:
For higher current flashlights, please note scheme 2: You only need one additional automotive relay with normally closed contacts. In any case, the craftsman’s task is to find in the on-board network a wire to which power is supplied when the ignition is turned on, and another one that goes to the headlight bulb or low beam. If you purchased a product with an electronic unit, you only need to make a tap from the light bulb. And connect the remaining two wires directly to the battery terminals. Do not confuse the polarity - it is indicated in the instructions.
LED daytime running lights(DRLs) are used during daylight hours to identify a vehicle on the roadway.
This is a current passive safety standard that helps prevent a significant percentage of accidents on the road. The preferred option is a stable and bright light source of sufficient power.
The brightness of LEDs is much higher than ordinary daylight, which is associated with color temperature. That is why this option is in increasing demand, remaining visible even against the backdrop of direct sunlight, which is yellow in nature.
- The shape selected for the bumper design is usually rectangular or round;
- Dimensions depending on the installation method and vehicle dimensions;
- LED power;
- Number of LEDs;
- Total brightness is usually 150-330 lumens per unit;
- The presence of reflectors, lenses, reflectors or other additional elements to increase the flow of light;
- Build quality, ease of fastening, use of stabilizers;
- Life time.
Another important criterion is the manufacturer or brand, which can directly indicate the quality of the selected model. It is better to give preference to proven options with a good reputation.
Basically, these are European brands, for example, although there are also Asian analogues of identical quality, one of the most popular.
One of the decisive factors is price. It depends on several criteria at once:
- Manufacturer;
- Manufacturing technologies;
- LED quality;
- Exterior design and much more.
Types of LED DRLs
There are two main categories:
- Universal, which are suitable for cars of different models and are distinguished by their unpretentiousness to operating conditions and ease of installation;
- Regular, intended for cars of a specific make or model.
Both options are produced by a number of world-famous manufacturers, due to which you can choose an option for any task and budget.
Another classification identifies:
- External DRLs, which are installed in a separate housing. The main advantages are ease of installation, low cost, and the possibility of manual installation. Disadvantages: vulnerability to damage, outdated appearance.
- DRL with installation in the headlight. This option allows you to install powerful lighting sources while maintaining the factory design of the car. Indoor installation requires compliance with a number of rules and regulations, as well as more significant financial and time costs.
Characteristics of LED DRL
In order to buy LED daytime running lights consciously and competently, you should study their characteristics in detail in advance, which you will need to base your choice on.
- Block shape and dimensions
DRL blocks differ in parameters and can consist of two interchangeable or different elements that do not require replacement.
The design completely depends on the imagination of designers and developers, so in addition to classic forms, there are curved, triangular and other designs.
Main selection criteria - type and features of the bumper, the specific installation location and its depth, the appearance of the result.
- Number of diodes in the block
The kit consists of two blocks, each of which contains a certain number of diodes that affect the brightness of the light and the appearance of the structure.
Depending on the model, this figure varies from 1 to 6 or from 4 to 12 units per block.
The standard option is 5 diodes, although this solution is not suitable for all car brands.
- LED Location
It can be located at the top, bottom or in the middle. The last option is most common, although more non-standard models can be found.
- The power of light
It is important to maintain a balance between light and dark times of the day. During the day, the high brightness of the diode increases its visibility, and at night it can “blind” an oncoming driver.
For regulation, a special controller with auto-dimming capability is increasingly being used.
Installation options for daytime running lights
There are many options for connecting and using DRLs, so you need to decide in advance on the optimal solution:
- Automatic switching on when starting to move and switching off when stopping. The speed sensor acts as a source of information, and during parking, the side lights perform the designation function. This option fully complies with traffic regulations.
- Using fog lights in daytime running mode. Switching off occurs automatically, along with the ignition.
- Switches on when the generator starts.
- Implementation of DRL using low beam.
- Linking daylight on/off to generator operation.
- Turning on the DRL when starting the engine and turning it off from or.
- Turning on DRL when starting the engine and operating at half power when starting daytime or
- DRL turns on a few seconds after starting the engine, and switching off when using side lighting.
- Turn on the low beam and turn off the interior lighting when starting to move.
When installing DRLs, you must adhere to the official state standard. Although there are no special requirements for the installation diagram, there are several basic norms:
- Height distance: 250-1500 millimeters from the ground.
- Width distance: no more than 400 millimeters from the edge of the overall width of the vehicle. The distance between the inner edges of visible surfaces is from 600 millimeters (less often – up to 400, with a vehicle width of up to 1300 millimeters).
- Length distance: The light emitted must not interfere with the driver directly or when reflected by reflective surfaces.
As a result of the installation, the daytime running lights should turn on automatically after the engine control is switched to the appropriate mode.
It is necessary to provide the ability to disable automatic mode without special tools. When the headlights are turned on, with the exception of brief signal flashes, the DRLs should turn off on their own.
Many modern kits already have connectors that can be installed using the one-click principle. Installation of such LEDs comes down to installing blocks on the body. This applies mainly to the latest car models.
When working with older cars, it is better to immediately contact specialists who offer their services at any car service center.
Planning to handle the task yourself, V It is important not to fall under the restrictions of GOST, which requires certification of compliance of any changes to the vehicle.
Advantages of LED DRLs
- Improving road safety;
- Reducing accident rates by tens of percent;
- Minimum power consumption, reducing fuel consumption by 4-6%;
- Long service life of diodes, comparable to the service life of the entire car;
- Increased service life of the entire lighting system due to minimal wear;
- Automatic on and off, which does not require intervention from the driver;
- A variety of shapes and designs to implement design solutions;
- Variety of characteristics for any conditions;
- Easy installation and low maintenance;
- Wide selection of lights of different models from different manufacturers;
- Possibility of switching to side lighting mode;
- Bright light that does not blind oncoming traffic;
- Protection from external damage and moisture;
- High-strength body materials;
- Stylish, original element of car tuning.
Disadvantages of LED DRLs
The main disadvantage of such an acquisition is its price, It is unlikely that you will be able to buy cheap LED DRLs of good quality. High-quality, reliable and durable LED lights require financial costs, which may seem quite high.
But in practice, due to its cost-effectiveness and excellent functional characteristics, such an investment pays for itself in the shortest possible time.
Another problem is installing DRLs in the absence of connectors. But this can also be dealt with by devoting a little more time to the issue. It is enough to make one effort by installing daytime running lights with your own hands, and in the future the units will not require complex maintenance and additional expenses.
Application area
LED daytime running lights Can be installed on most European and Asian cars. Domestic cars will also have their own solutions, although often this issue still remains at the discretion of the driver.
DRL units are most often installed next to the headlights or in the voids of the bumper, if available.
Features of installation work depend on the car model and type of lights. It is necessary not only to secure the elements, but also to connect them correctly for proper functioning.
Conclusion
Companies producing LED running lights offer all new developments and original options.
The use of such technologies is not only a practical solution, but also a concern for the safety of the driver, passengers and other road users.
Tell your friends!The continuously increasing number of cars on the roads, the associated complication of the road situation, requiring the creation of conditions for good visibility in any weather, increases the risk of accidents. To increase the visibility of the car's silhouette to the maximum extent - this is the task of the designers. Its successful solution makes it possible to reduce the likelihood of collisions. Some time ago, traffic regulations made it mandatory for drivers to turn on their low beams, even when driving during the day.
The term DRL (daytime running lights) spread when lighting devices that were additionally installed on the car entered the market. DRLs are primarily intended for daytime use; standard lighting systems are designed to work in the evening and at night. The use of the latest technologies in the field of lighting technology has opened up the possibility of using high-brightness LED lamps as lighting devices. The variety of shapes and designs of LED DRLs allows the driver, in addition to increasing safety, to add expressiveness to his car and decorate it with a stylish lighting device.
Advantages
By purchasing LED running lights and installing them on a car, its owner increases the degree of safety and integrity of the car and saves on its servicing.
The advantages of such a purchase have been tested by time:
- In automatic mode, the devices are powered from the car’s own network. They are controlled by the ignition switch via a module connected to the battery. Flexible LED daytime running lights turn on when the engine is started and turn off when the engine is switched off. This eliminates the need to monitor the lighting while parked.
- The high-brightness LED glow significantly improves the visibility of the size of all cars involved in traffic on the roads. The effect of the flexible LED daytime running lights is enhanced by the use of forward-facing light emission.
- Minimum power that saves the life of a car generator.
- Reducing fuel consumption by up to 3% compared to the use of standard optics due to a decrease in the power taken from the generator.
- Highly durable housing that protects devices from dust and dirt.
- The long service life of the device (10 thousand hours) makes them more profitable than incandescent lamps.
- Attractive appearance of the devices and simple connection. No special preparation is needed. The device is mounted using the fasteners supplied with it.
In addition to the basic tasks of improving car safety, DRLs are used as an addition to standard lighting. If LED lights are used and visibility is sufficient, the standard headlights can be omitted, allowing the incandescent lamps to remain.
Installation
Most often, daytime lights are mounted behind the radiator grille or in the bumper. They can be installed in modular car headlights. The shape of the lights is determined based on regulations and to ensure the most efficient operation. The light output of each LED device cannot exceed 300 lumens. This standard limits the number of LEDs in a device.
Scandinavian countries have made independent running lights mandatory.
Standards
European regulations determine the characteristics that LED DRL daytime running lights will have. Since 2011, all manufactured cars have been equipped with them. The rules establish a fire area of 25-200 cm² (Russian standard - at least 40 cm²). Light radiation should be 400-1200 cd (Russian standard 400-800 cd). The rules also state that LED DRL daytime running lights must be installed at a height between 250-1500 mm. A minimum of 6 cm between two lights and no more than 4 cm from the edge. In addition, when the low beam is turned on, the auto DRLs are turned off. Similar norms exist in Russia (41.48-2004).
It is precisely the brightness requirements that many manufacturers of inexpensive DRLs cannot meet. Only powerful and, accordingly, expensive LEDs can achieve a flashlight luminosity of 400-800 cd.
Housing material
The DRL housing is made of aluminum or plastic. This eliminates rust. However, there is a nuance: LEDs, despite their high efficiency, get very hot. They should not be allowed to overheat; the service life will sharply decrease. This means a high-quality heat sink is required. Powerful and bright DRLs operate with currents of hundreds of milliamps, which means the plastic housing is no longer needed. Manufacturers are aware of this problem. Therefore, if you purchase DRLs in a plastic case, you should not rely on high light intensity. It will not comply with GOST.
Manufacturers
It is not difficult to choose running lights that meet the standards. You need to install certified products on your car. DRLs of German companies performed best.
Philips LED daytime running lights are designed for cars and small trucks. The working life of LED lamps is 5 thousand hours. The cases are made of aluminum and their glass is shock-resistant.
Osram produces classic running lights based on its own technology.
DRLs from Hella, which have 5 LEDs per headlight, are widely used.
Japanese manufacturers did not pass by these products either. Thus, PIAA produces many options for lights for a wide variety of cars.
Among domestic manufacturers, Mayak Corporation stands out. It produces daytime running lights for cars. Its latest model of DRLs has 4 powerful, bright LEDs.
Naturally, most of the DRLs on the Russian market come from Chinese and Korean manufacturers. The price for these LED daytime running lights ranges from 400-1500 rubles. Daytime running lights from Sho-Me sell especially well.
Results
There are many different products on the LED DRL market to suit every taste and budget. True, prices are not always affordable. However, the safety of the driver and passengers is always the basis of the purchasing decision. The style of execution of the devices and successful design developments make it possible to protect the car from various dangers on the roads, but also to give it the perfect style. Visiting stores will help you get acquainted with the price level and purchase a set of lights of decent quality.
Daytime running lights (LED DRL) are additional light source, and are used to better see the vehicle moving ahead during the day. According to the traffic rules, there are a number of requirements for installing DRLs, which you can familiarize yourself with in.
Our online store offers car running lights (DRLs), which have a modern and stylish design. Depending on your wishes, you can buy daytime running lights or drl with a different number of LEDs, and, accordingly, different levels of light produced.
Please note that we are implementing LED DRL Philips– LEDs certified in Russia and allowing installation in accordance with GOST.
On the page: 30 25 50 75 100
Sorting: Default Name (A -> Z) Name (Z -> A) Price (ascending) Price (descending) Model (A -> Z) Model (Z -> A)
These DRLs are a universal type of daytime running lights, and therefore can be mounted on any passenger car. The devices produce a uniform stream of white light, the color of which is at least 6000 K. Such light characteristics guarantee that your car will be visible at a great distance during the day. This increases the level of safety on the road. The set includes two headlights, each consisting of 12 LED lamps. There is also a relay.
Hella 12LED DRLs are vibration resistant and do not heat up. The devices do not damage the plastic parts of the optics. In addition, the headlights take a minimum...
This set of daytime running lights consists of two headlights (on both sides), each headlight has 12 LED bulbs. The set does not include a relay, but it can be purchased separately. DRL Hella 12LED produces a uniform light of 6000 K. This color is characteristic of daylight, which is why the light of the lamps identifies a car during daylight hours over a long distance, increasing the safety of movement.
Advantages of Hella 12LED DRLs: consume minimal vehicle energy;
Hella DRLs from the LED-Technic line are made in a rectangular form factor; they can diversify the exterior of many passenger cars. They are universal daytime lamps.
Dimensions of LED devices: body length 216.7 mm;
device height 18.8 mm;
depth 26.2 mm.
With this set of universal DRLs, you can increase safety on the road and make your car different from similar brands/models, making it stand out among the huge flow of vehicles.
A special feature of the LEDayFlex line of daytime lights is that each headlight module is connected to each other by wiring. Modular devices can be given different shapes; the mode and quality of DRL operation will not depend on this. The diameter of one module is 30 mm. The entire length of the wiring is insulated and protected from moisture.
Technical characteristics of LEDayFlex 8: can become part of the optics of light...
Nella is the first brand to introduce universal DRLs to users, increasing the level of safety on the roadway during the day. To begin with, it is worth noting that the devices are designed for installation on sports cars and professional commercial vehicles. The former are chosen because of the style they will give the car, the latter – because of safety and cost reduction on DRL energy consumption.
Daytime running lights are presented in a rectangular form factor and are designed for installation on a car with a curved bumper. The bumper angle should be 30°. The set includes two headlights, each of which consists of eight LEDs. The peculiarity of the devices in this line is the diffuser, which is resistant to UV rays and all kinds of road reagents.
LED lamps are resistant to machine vibrations. The devices can withstand sudden voltage changes and temperature differences. All these qualities provide a long trouble-free service life, up to 10,000 hours or 12 years of operation.
Special character..
Hella LEDayLine 4 lamps can only be installed on a vehicle with a nominal voltage of 12 Volts. The kit includes two modules, which consist of 4 LED lamps.
DRL Osram - as an important part of every car Daytime running lights, such as Osram Ledriving, are such devices that are necessary in our modern world. They provide maximum safety and security for the driver, since they have a glow that is noticeable even in strong sunlight. It is worth noting that according to European legislation from 2011, all cars must travel with the lights on, regardless of the time of day. This situation is explained by the fact that too many accidents began to occur, which for the most part do happen..
High-quality additional light is the Osram Ledriving lights of the 301 series. As you know, recently it has become mandatory to use lighting even in sunlight, since the minimal expressiveness of the car leads to frequent traffic accidents. In order to avoid the use of headlights, which are characterized by high energy consumption, a practical option is offered - these are the Osram daytime running lights of the Ledriving model range 301 series. The device was specially developed in Germany to provide a large number of the population with a clear, bright and catchy glow.
By..
Daytime running lights for identifying a moving vehicle in the daytime from Osram are the strength, reliability and impeccable style of the car that it will acquire. A distinctive characteristic of this model is that DRLs are a universal type of device; they are mounted in the standard location of the PTF.
Only functioning DRLs during daylight hours can increase your level of safety while driving. How exactly? It's simple, you just need to buy lights, mount them on the front of your car and drive on the roads with the headlights on. Snow-white lamps with a color temperature of 6000K and a luminous intensity of 560 cd will make your car much more visible on the road. The peculiarity of DRLs is that they are not just functionally useful, but also give the car a stylish appearance. ..
Since 2010, all cars must be driven on roads with their DRLs switched on. Running lights increase the level of safety on the road not only for you, but also for other road users. The advantages of Sho-Me DRL 510 DRLs are that they comply with European standards. The lamps are so bright that they are visible even in sunny summer weather. LED DRLs can significantly extend the life of your car's headlights. ..
LED, stylish and incredibly bright, the lights will make your car much more visible on the roadway during daylight hours. Sho-Me DRL 523 running lights operate with a voltage of 10-16 V, their power is only 10 W. While the light intensity is 700 cd. The lamps operate with a color temperature of 6000 K and meet all European standards. By installing these lights on your car, it will not only become safe, but will also acquire a more stylish appearance. ..
Many people know that every car must be equipped with daytime running lights in order to increase the level of safety on the road. Sho-Me DRL 6002 DRLs operate with a color temperature of 5000 K, which makes the vehicle visible on the road during daylight hours. The advantage of the lamps is that they economically consume machine energy, and also have an incredibly long service life - 100,000 on/off. Thus, you will receive an incredibly useful lighting device that will also make your car stylish in appearance. ..
With the help of DRL Sho-Me DRL 824WCB you can ensure your safety while driving during daylight hours. The color of LED lamps is 6000 K - this is brighter than the light of the Sun. Your vehicle will be noticeable among the huge mass of traffic. Each headlight contains 24 LEDs, which together produce a bright and powerful white light output. The devices are rectangular in shape and are mounted in front of the bumper using a special bracket. ..
With these running lights, your car will become much more visible on the road during the day. Powerful LED lamps emit snow-white light that does not blind oncoming drivers - this is a huge plus. LED lamps are universal for long-term burning (during the car’s movement during the day), since they are: Economical in car energy consumption;
Work for a long period of time;
Increase the safety of vehicle movement even on the sunniest day;
They don't get warm;
Philips LED Daytime Lights 5 12810WLEDX1 daytime running lights are made in accordance with modern standards and are suitable for almost any European and Asian car. The German company Philips has specially developed this series of running lights, which complies with the new European directive on fluorescent lamps.
